RDF-G25 Firmware Station

BLE reads the device UID. Manual lookup uses the serial number only.
Web Bluetooth

Procedure

  1. Power on the device while holding the first antenna button.
  2. Connect the USB cable to the PC.
  3. Turn on Bluetooth on the device, then connect here over BLE (or look up by serial number).
  4. After the archive downloads, extract it and copy the file into the root of the RDF-G25 drive.
  5. If there is not enough free space, format the RDF-G25 drive, then copy the file again.
  6. After copying, eject the drive safely and power the device off.

Connection

Connect over BLE, or enter the serial number if the device cannot be reached.

A PC with Bluetooth (BLE) is required. Use Chrome or Edge on this HTTPS page (or localhost).

The MCU UID is read from the device over BLE and must not be typed by hand. You are solely responsible for any firmware obtained with a manually entered serial number. A wrong SN can download a package for a different unit.

Device

Serial number
--------
UID—
Archive—
Size—

Log